Monomix Application Phases
1
Monomix is ready to use: always mix the paste manually.
2
Special finishes: pour the additive onto the paste and mix slowly.
3
Apply with a rubber spatula covering about 3-4 m2 areas to be cleaned within 15 minutes.
With temperatures slightly below +30°C, cover an area of about 1 m2 proceeding immediately with the cleanup.
4
For the cleaning, use the supplied sponge squeezing out the water completely and performing circular movements without emptying the joints.
Use the least amount of water possible.
Stop cleaning once drying has commenced.
5
If transparent streaks be left back, clean up after 24 hours or anyway when hardening has occurred with the neutral cleaner MONOMIX CLEANER GEL.
Distribute the product neat onto the surface, letting it act for 5 minutes and rubbing with the white felt.
6
Rinse with moistened sponge and dry with a clean cloth.
7
Leftover material, sealed in its original packaging, is reusable for several months.
Download application phases
Video
Advised tools
Art. 946GR
Green rigid rubber spatula for epoxy plastering
Art. 125/G
Synthetic foam sponge for Monomix
Dimensions: 11x16x5 cm
Monomix Cleaner Gel
Biodegradable detergent for removing residues of grouting carried out with the ready-to-use single component water-based polyurethane grout, Monomix.Discover the other products
Starlike®
LITOKOL Building Materials (Shanghai) Co., Ltd.
Room 3301, Jia Hui Intl. Plaza –
No. 325 Tian Yao Qiao Road
Shanghai 200030, PRC
Tel +86 21 5425 3588
Fax +86 21 5425 3288
E-mail office@litokolchina.com